Feed-Through Seal
The Ekovilla X Feed-Through Seal is intended especially for sealing the feed-throughs of ventilation pipes, central vacuum cleaner pipes, and electric pipes. The feed-through element has a self-adhesive flange. Thanks to its size, the flange seals even the largest perforations and cuts needed for installing ventilation pipes, etc.
Properties
The flexible flange collar can be tightly fitted around the pipe, ensuring a reliable seal. The Ekovilla X feed-through can be installed quickly and easily.
Installation
Cut a hole slightly smaller than the pipe diameter.
Clean around the pipe and remove the back papers.
Press the feed-through seal firmly into place.
Ensure airtightness of edges and pipe using Ekovilla X sealing tape.
Technical Details
- Material: Polyethylene plastic made from recycled material
- Adhesive: VOC-free (class A+), solvent-free, plasticizer-free
- Installation temperature: > +5 °C
- Flange section size: 295 × 295 mm
- Suitable for pipes: 5–160 mm
Packaging
- Packaging unit: Carton
- Contents: 80 pcs./box
- Weight: 20 kg/box
- Box dimensions: 40 × 60 × 40 cm
Nail Seal Tape
Ekovilla X Nail Seal Tape is a single-sided tape made of closed cell polyethylene foam and coated with acrylic dispersion adhesive.
Designated for use as a sealing tape in roof and construction works. Its elastic structure allows alignment of the counter-batten installed on the roof membrane.
Applications
Ekovilla X Nail Seal Tape is designed for sealing and insulating in roof works as well as general construction. Recommended for sealing installation punctures in roof membranes and foils. When applied below the counter-batten, the tape allows to align the uneven spots.
Thanks to this application, all penetration points of the roof membrane through roofing staples and nails are sealed, which eliminates the risk of water and moisture penetration on rafters and into the thermal insulation.
Application temperature range is from +5 °C to +40 °C.
Advantages
- UV-resistant
- Waterproof
Package Information
- GTIN: 6419412000210
- Breite: 50 mm
- Länge: 25 m
Use Together With
- Ekovilla X Wind Seal
- Ekovilla X Mono Roof SK-2
Sealing Tape
Ekovilla X sealing tape is a flexible, strong-adhesive tape intended for sealing joints and seams of air and vapor barriers.
Packaging Details
- GTIN: 6419544508165
- Package: Cardboard box, 12 pcs/box
- Contents: 12 × 25 m = 300 m
Technical Details
- Backing: Polyethylene film, green
- Adhesive: Acrylic (VOC-free: class A+, solvent-free, plasticizer-free)
- Release paper: Silicone coated paper, white
- Adhesion strength: ≥ 25 N/25 mm (EN ISO 29862)
- Water vapour resistance (SD): approx. 30 m
- Installation temperature: Above -10 °C, recommended +5 °C to +30 °C
- Initial adhesion: Very strong
- Moisture resistance: Very good
- Dimensions: Width 50 mm, length 25 m
- Reinforcement: Polyester mesh
- UV resistance: Up to 3 months
- Long-term durability: Very good
- Temperature resistance: -30 °C to +80 °C
- Shear strength: 120 min, 500 g / 625 mm² (EN ISO 29863)
- Thickness: 0.27 mm (EN 1942)
- Glue amount: 200–210 g/m²
- Storage: In dry, +10 °C to +25 °C, UV-protected, max. 24 months
Adhesion Information
- The initial adhesion occurs immediately after installation, after applying pressure.
- The final adhesion strength at +5 °C is achieved approximately 24 hours after installation.
- In the temperature range of -10 °C to +5 °C, final adhesion is achieved more slowly (within 72 hours or more).
- At temperatures below -10 °C, the formation of adhesion slows down, but accelerates again as the temperature rises.
Certifications
Ekovilla X sealing tape meets all requirements of:
- DIN 4108-7
- DIN 4108-11 (ageing)
- EnEV
- ÖNORM B 8110-2
- SIA 180
- European directives 2000/53/EC, 2002/95/EC and REACH
